manufacturer category series package voltage class rev . date ec29 series ? rohs compliant (pb-free) ? lvcmos output ? 1.8v supply voltage ? ceramic smd package ? stability to 20ppm ? standby function ? available on tape and reel ecliptek corp. oscillator ec29 ceramic 1.8v os1b 01/06 oscillator ec29 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. frequency range (f o ) operating temperature range (otr) storage temperature range (str) supply voltage (v dd ) input current (i dd ) frequency tolerance/stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time (t r /t f ) duty cycle (sym) load drive capability (c load ) tri-state input voltage standby current start up time (t s ) rms phase jitter 1.544mhz to 10.000mhz 10.001mhz to 25.000mhz 25.001mhz to 40.000mhz 40.001mhz to 50.000mhz 50.001mhz to 70.000mhz 70.001mhz to 100.000mhz 100.001mhz to 110.000mhz 110.001mhz to 125.000mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration i oh =-2.8ma, 1.544mhz to 40.000mhz i oh =-8ma, 40.001mhz to 125.000mhz i ol =2.8ma, 1.544mhz to 40.000mhz i ol =8ma, 40.001mhz to 125.000mhz < 40.000mhz 10% to 90% of waveform > 40.000mhz 10% to 90% of waveform at 50% of waveform at 50% of waveform no connection v ih : >90% of v dd v il : <10% of v dd disabled output: high impedance, 1.544mhz to 40mhz disabled output: high impedance, 40.001mhz to 70mhz disabled output: high impedance, 70.001mhz to 125mhz 12khz to 20mhz offset frequency 0c to 70c -40c to 85c -55c to 125c 1.8v dc 5% 2ma maximum 3ma maximum 4ma maximum 8ma maximum 10ma maximum 18ma maximum 20ma maximum 25ma maximum 100ppm, 50ppm, 25ppm, or 20ppm 90% of v dd minimum 90% of v dd minimum 10% of v dd maximum 10% of v dd maximum 6 nseconds maximum 3 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 15pf maximum enables output enables output disables output: high impedance 10a maximum 100a maximum 10a maximum 10 mseconds maximum 1pseconds maximum h 1.6 l 7.0 w 5.0 1.544mhz to 80.000mhz and 98.304mhz, 100.000mhz, 106.250mhz, 110.000mhz, 125.000mhz
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec29 ceramic 1.8v os1b 01/06 ec29 00 et t ts - 30.000m tr frequency tolerance / stability 00=100ppm maximum (standard) 45=50ppm maximum, 25=25ppm maximum 20=20ppm maximum operating temperature range blank=0c to 70c (standard) et=-40c to 85c part numbering guide a b c d e f 16.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215 line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage packaging options blank=bulk (standard) tr=tape and reel frequency duty cycle blank=50 10(%) (standard) t=50 5(%)
|
